What materials can a CO2 laser mark and engrave? Wood, paper, glass, acrylic, leather and stone? Check. What about marking and engraving metal, such as stainless steel, aluminum, copper, nickel and brass? While under normal circumstances you would need a fiber laser to affect those materials, there is a remarkable product to treat metals for engraving with a CO2 laser called Cermark.
Easy To Use
Cermark is an easy way to enable permanent laser marking and engravings to all of these surfaces and more. This is done by glazing the surface of the metal (or other material) with a special chemical coating that can be affected by the laser and then cleaned of, leaving a brilliant mark.
Easy To Find
You can purchase Cermark as a paint, tape or spray, which you then apply to the surface of your material. Once dry, you simply engrave your design as normal (or use these guidelines). Once the engraving is complete, you clean off the excess cermark with water and a nylon scrub brush and you are done!
For more exclusive tips, tutorials, free project files and certifications, check out Laser 101 and see what you and your laser cutter are capable of.