#0048 Leather Eye Patch

Safety First: Ensure workspace is free of fire, electrical and other safety hazards. Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand
Power on the laser and all of its components.
Ensure that:
- The laser is powered and the boot up cycle begins on the screen.
- The cooling system is connected properly and water is flowing through the tube.
- The air compressor is powered and exhausting air to the laser head.
- The exhaust system is on and vented into a safe location.
Connect to RetinaEngrave 2.0 software using your machine’s touch screen to copy the software IP address into your favorite browser. The Wired IP address is displayed at the bottom of your touch screen.
Import your design and adjust power and speed settings. Double check settings including the number of passes and cut order.
Insert material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should be done each time a new material is introduced.
Use the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly.
Run the job file. Do not leave a job running unattended.

First choose what type of string you would like to use; Or design your own cool strap!

Then you will run your string through one side of the patch. Adding a knot will keep the string from moving. Remember that you can always engrave your own design into the leather.

Now repeat on the other side. Make sure to wash off any unwanted debris. Also when the leather is wet it will give you an opportunity to shape it before it dries.

Leather also holds paint really well and a deep engraving gives you the ability fill the design with paint.

You ARRRR Ready!

Leather Eye Patch

Submit your Project!

DISCOVER

COMPANY

Shop

Categories

Navigation

Leather Eye Patch

Submit your Project!

Sign up for our newsletter

DISCOVER

COMPANY

Shop

Connect with Us