Acrylic Butterfly

Yaya's Butterfly

 

Yaya Han is a Chinese–American cosplayer, model and costume designer based in the United States. She is a regular judge at cosplay competitions. Han was featured on the Syfy channel's Heroes of Cosplay, and has appeared as a guest judge on the TBS reality show King of the Nerds multiple times. 

 

Yaya Hans website: https://www.yayahan.com/

 

Yaya Han coupon codes: https://info.fslaser.com/yayahan-cosplay

Screen Shot 2023-10-09 at 3.53.33 PM
  1. Safety First: Ensure workspace is free of fire, electrical and other safety hazards. Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand
  2. Power on the laser and all of its components.
  3. Ensure that:
    - The laser is powered and the boot up cycle begins on the screen.
    - The cooling system is connected properly and water is flowing through the tube.
    - The air compressor is powered and exhausting air to the laser head.
    - The exhaust system is on and vented into a safe location.
  4. Connect to RetinaEngrave 3.0 software using your machine’s touch screen to copy the software IP address into your favorite browser. The Wired IP address is displayed at the bottom of your touch screen.
  5. Import your design and adjust power and speed settings. Double check settings including the number of passes and cut order.  (It is a good idea to have extra material on hand to run power and speed tests before hand)
  6. Insert material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should be done each time a new material is introduced.
  7. Use the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly.
  8. Run the job file. Do not leave a job running unattended.

We would love to see your creations.  If you have created this project and would like to share it with us, make sure to tag us on Facebook and Instagram using the #MadeWithFSL hashtag!

 

Difficulty:  ★ 

Estimated Laser Time: 30 Minutes


Minimum Requirements:

  • 40W CO2 Laser (Muse Core/3D Equivalent) or greater.

Raw Materials:

  • 1/8" Acrylic / 1/4" Acrylic

Additional Material Needed:

  • Acrylic Weld

Video and Project Files Below ▼

 

 

Download Files!

Submit your Project!